Description
The Tristar TS-45 diversion charge controller is the workhorse of the renewable energy market with many years of service in systems worldwide.
In 'diversion' mode, the controller is connected to your battery bank and also the dump load. It operates as an 'overflow' controller for your battery bank – bleeding excess energy to the dump load when the batteries are full. This means that the turbine is always running – and not being switched on and off as is the case with other charge control methods. It also means that your batteries are never 'cycled' through on / off charging techniques and this will prolong the life of your expensive battery bank.
The TS-45 uses pulse width modulation (PWM) to send the exact right amount of excess energy to the dump load at any time. Add the Tristar TS-M-2 LCD readout display from the pull-down list above.
- Suitable for all battery voltages – 12V, 24V & 48V
- Advanced charge control algorithms – Giving better battery charging using Pulse Width Modulation
- 3 modes of operation– Diversion, Load Control & Solar Control
- 45 amps of power handling capacity – enabling dump load capacities of 600W (12V), 1200W (24V) or 2400W (48V)
- Fully Adjustable – DIP Switch settings allow programming of different set points
- High Reliability – The large heat sink allows operation up to 45 deg C
- More Information – Charge status LED’s and optional LCD display
- Easy to install – Large power terminals and conduit knock-outs
- Communication Capability – Optional RS232 PC interface for custom setting, data logging and remote monitoring
Technical Specification
Technical Specification
|
TS-45
|
TS-60
|
|
| Maximum Battery Current 45 amps 60 amps |
45A
|
60A
|
| Maximum Solar Input @ 12V |
600W
|
800W
|
| Maximum Solar Input @ 24V |
1200W
|
1600W
|
| Maximum Solar Input @ 48V |
2400W
|
3200W
|
| Nominal System Voltage |
12, 24, 36, 48V DC
|
|
| Max. Solar Open Circuit Voltage |
125V DC
|
|
| Minimum Battery Operating Voltage |
9V DC
|
|
| Maximum Self-consumption |
<20mA
|
|
| Transient Surge Protection |
4500W/port
|
|
| Dimensions |
26.0 x 12.7 x 7.1 cm
|
|
| Weight |
1.6kg
|
|
| Max. Wire Size |
35 mm² / 2 AWG
|
|
| Conduit knockouts |
Eccentric 2.5/3.2cm (1.0/1.25 inch)
|
|
| Enclosure |
Type 1 (indoor and vented) IP20
|
|
| Ambient Temperature |
–40°C to +60°C
|
|
| Storage Temperature |
–55°C to +100°C
|
|
| Humidity |
100% non-condensing
|
|
|
CE Compliant
|
||
|
ETL Listed (UL1741)
|
||
|
cETL (CSA C22.2 No. 107.1-01)
|
||
|
FCC Class B Part 15 Compliant
|
||
|
Complies with (NEC) U.S. National Electric Code
|
||
|
RoHS Compliant
|
||
|
Manufactured in a certified ISO 9001 facility
|
||
